Home
Search results “Mqtt broker openhab”
MQTT Binding 2.4 OPENHAB 2 deutsch / MQTT Broker in OPENHAB 2 anlegen / OPENHAB 2 Tutorial deutsch
 
07:58
In diesem kurzen Video zeige ich euch wie ihr in openHAB2 von dem MQTT Binding 1.x auf das neue MQTT Binding 2.4 umsteigen könnt. Zuerst wird das Binding installiert und danach ein MQTT Broker angelegt. Falls ihr MQTT schon mit dem Binding 1.x benutzt habt übernehmt dazu einfach den Broker Namen, ID, Username und Passwort von der MQTT Config datei. Danach legt ihr anhand des Beispiels eines Sonoff Basic´s ein Thing an, andem ihr dann einen Channel mit Hilfe von MQTT.fx anlegt. ➥➥➥ ABONNIERT MEINEN KANAL FÜR MEHR VIDEOS ➥➥➥ Verpasse kein Video zum Thema Smart Home. Abonnieren ⇢ http://bit.ly/ST33ZYMedia ➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥ Facebook ⇢ https://www.facebook.com/St33zy-MEDIA-618163721950192/ Twitter ⇢ https://twitter.com/St33zyM ➥Unterstützen ⇢ https://www.gofundme.com/ST33ZYMedia
Views: 12624 ST33ZY Media
Complete Guide Setting Up The Home Automation Server (OpenHAB 2 + MQTT): Software WINDOWS
 
12:59
In this video I will show how to install OpenHAB 2 and Mosquito MQTT on The Smart Home, Home Automation Server which runs on a raspberry pi 3 using a Windows Computer. UPDATE!!! MUST READ!!! Order the Kits, PCBs or 3D Printed Parts to make the devices here: https://www.mksmarthouse.com/shop In the new versions of OpenHABian you must: 1. Go to: https://github.com/openhab/openhabian/releases 2. Scroll down to downloads and download the raspberry pi file by clicking on the file called “openhabianpi……..xyz” 3. It should download 4. go to: http://www.7-zip.org/ and download and install 7-Zip 5. once it is installed right click on openhabianpi....xyz then hover over to 7-Zip and click extract here 6. the file is now a .img file Link To Home Automation Server Guide: http://www.mksmarthouse.com/setup-instalation Home Automation Server Videos: Demo - https://youtu.be/bbWDnT-QMTI Hardware - https://youtu.be/rxCFN4l6gYg Software (Using Mac) - https://youtu.be/-uVmblps3kg Software (Using Windows) - https://youtu.be/7YR0xwyBJ2E Final Installation - https://youtu.be/cxP6rKpVpbk Product Links: Raspberry Pi Stuff Raspberry Pi 3: http://amzn.to/2m62Kg6 Heatsink: http://s.click.aliexpress.com/e/IEYjeMf Case With Fan: http://s.click.aliexpress.com/e/aUBAeEi Power Adapter: http://amzn.to/2lIyh5E Micro SD Card: http://amzn.to/2mQZGo7 Ethernet Cables: http://amzn.to/2mQVsws ​ Wall Mount Hardware Plastic Spacers: http://s.click.aliexpress.com/e/2nUbA2j Screws (M3.5 + 20mm): http://s.click.aliexpress.com/e/jMfIEea ​ Tools Micro SD Card Reader: http://amzn.to/2lqsvL1 Impact Gun + Drill: http://amzn.to/2lqke9L Screw Bit Set: http://amzn.to/2mQSpoh Drill Bit Set: http://s.click.aliexpress.com/e/EyJMByR Counter Sink Bit Set: http://s.click.aliexpress.com/e/vfYNNRb Check out the official website: http://www.mksmarthouse.com Twitter: https://www.twitter.com/mksmarthouse Facebook: https://www.facebook.com/MK-SmartHouse-244455842554740/ Instagram: https://www.instagram.com/mksmarthouse This channel will show you the path to creating your very own Ultimate Smart House using Arduino, raspberry pi, esp8266, OpenHAB 2 and more to do home automation. Each video will be a different project and tutorial that you can follow to make your house more technologically advanced. Also, there is more information as well as detailed guides on mksmarthouse.com
Views: 120823 MK-SmartHouse
BK Hobby Live Stream #4 - openHAB Basics - MQTT v2 Binding Configuration
 
01:17:00
openHAB MQTT v2 Binding: Setup, Configuration and Conversion of MQTT v1 devices I've started the slow process of converting my sensors from openHAB MQTT binding v1 to v2. As I do this, I've noticed there are several points of confusion in how the v2 binding works, including definition of MQTT Things (Broker, Homie, Generic, etc...) Channels (topic channels, trigger channels, etc..) and redefinition of v1 Items. So, I'll do a quick live stream to show you how I configured my MQTT setup, the tools I use for MQTT troubleshooting, and answer any questions you may have about the setup! Join the Discord server at https://discord.gg/jUr7J4u
Views: 2452 BK Hobby
MQTT.fx Tutorial deutsch / MQTT Client / OPENHAB Tutorial deutsch / MQTT / TASMOTA / SONOFF
 
10:34
Das Programm MQTT.fx bietet eine grafische Darstellung um MQTT Nachrichten zu empfangen und zu senden. Mit einem MQTT Broker z.B. Mosquitto könnt ihr eure Geräte mittels einer Firmware z.B. Tasmota oder ESP Easy in eurem Smart Home System (openHAB, ioBroker, Home Assistant...) steuern. Als erstes legt ihr euch ein Profil an und stellt eine verbindung mit eurem Broker, der z.B. auf einem Raspberry Pi läuft her. Ist die Verbindung aufgebaut kann über Publish und Subscribe eine Verbindung bzw. ein Nachrichtenaustausch erfolgen. link zu MQTT.fx : https://mqttfx.jensd.de/ ➥➥➥ ABONNIERT MEINEN KANAL FÜR MEHR VIDEOS ➥➥➥ Verpasse kein Video zum Thema Smart Home. Abonnieren ⇢ http://bit.ly/ST33ZYMedia ➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥ Facebook ⇢ https://www.facebook.com/St33zy-MEDIA-618163721950192/ Twitter ⇢ https://twitter.com/St33zyM ➥Unterstützen ⇢ https://www.gofundme.com/ST33ZYMedia
Views: 3884 ST33ZY Media
SONOFF in OPENHAB 2 einbinden / MQTT Server / TASMOTA FLASH / OPENHAB2 / SONOFF BASIC
 
13:29
Servus Leute, in diesem kurzen Video zeig ich euch wie Ihr eure Sonoff Basics in euer Openhab System einbinden könnt. Als erstes installiert ihr über die Raspberry Config Datei/Einstellungen euren Mosquitto Server. Danach geht ihr im PaperUI eures OpenHab Systems auf AddOns und installiert das MQTT Binding 1.x . Danach könnt ihr auf die services/mqtt.cfg datei in Putty zugreifen und die Broker Informationen eingeben. Dazu benötigt Ihr: - ein laufendes Openhabian System auf eurem Raspberry Pi - SSH Zugriff auf euren Raspberry Pi - Putty - MQTT.fx ➥➥➥ ABONNIERT MEINEN KANAL FÜR MEHR VIDEOS ➥➥➥ Verpasse kein Video zum Thema Smart Home. Abonnieren ⇢ http://bit.ly/ST33ZYMedia ➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥ Facebook ⇢ https://www.facebook.com/St33zy-MEDIA-618163721950192/ Twitter ⇢ https://twitter.com/St33zyM Unterstützen ⇢ https://www.gofundme.com/ST33ZYMedia
Views: 15973 ST33ZY Media
ESP32 #34: Mosquitto + SSL/TLS, openHAB2, MQTT Dash + ESP32 Giveaway
 
21:46
Using the #ESP32 with a secured Mosquitto MQTT Broker and #openHAB2 and also from Android with MQTT Dash. ESP32 MQTT Example code: https://github.com/pcbreflux/espressif/tree/master/esp32/app/ESP32_mqtts_gpio Development Environment ubuntu 16.04 64 Bit (https://www.ubuntu.com/) Eclipse Neon (https://www.eclipse.org/) esp-idf commit fd3ef4cdfe1ce747ef4757205f4bb797b099c9d9 Fri Apr 21 12:27:32 2017 +0800 (https://github.com/espressif/esp-idf) xtensa-esp32-elf-gcc (crosstool-NG crosstool-ng-1.22.0-61-gab8375a) 5.2.0 (https://dl.espressif.com/dl/xtensa-esp32-elf-linux64-1.22.0-61-gab8375a-5.2.0.tar.gz) Arduino 1.8.1 (https://www.arduino.cc/) arduino-esp32 commit a83dd5f2b5bde6c2b2ac846fd1d1a7cd902899da Feb 17 14:55:07 2017 +0100 (https://github.com/espressif/arduino-esp32) With CC or Public domain Pictures from pixabay and wikimedia https://pixabay.com/en/router-154290/ https://nl.wikipedia.org/wiki/Bestand:OpenHAB-logo.jpg (previously claimed as CC) Installation #Mosquitto https://mosquitto.org/ https://www.digitalocean.com/community/tutorials/how-to-install-and-secure-the-mosquitto-mqtt-messaging-broker-on-ubuntu-16-04#step-6-%E2%80%94-configuring-mqtt-ssl http://jpmens.net/2013/09/01/installing-mosquitto-on-a-raspberry-pi/ Installation #openHAB http://www.openhab.org/ http://docs.openhab.org/installation/index.html This video contains NO paid promotion such as paid product placement! The giveaway by https://www.analoglamb.com is only for you, I even have to buy my own ESP Development Adapter. Terms and Conditions for AnalogLamb.com "Giveaway" NO PAYMENT OR PURCHASE REQUIRED TO ENTER OR WIN. You must be at the legal age of majority in your state or jurisdiction of residence at the time of entry. Limit one entry per person. The Giveaway shall take place on the date specified. The Sponsor is offering a prize to one randomly drawn individual who enter during the entry period. Winners will be notified by youtube comment typically within seven business days. A prize is typically shipped within one to three weeks after the drawing. The prize is neither transferable nor exchangeable and cannot be exchanged for money or money's worth. You be solely responsible for any taxes levied in relation to the delivery or receipt of the prize. By entering the giveaway you agree that pcbreflux and AnalogLamb.com, and each of their respective affiliates, will have no liability, and will be held harmless from and against any liability or loss, including reasonable attorney’s fees and costs, for all matters related to your acceptance, possession, experience with, use or misuse of the prize or participation in the giveaway. All information submitted will be treated in accordance with the AnalogLamb.com privacy policy.
Views: 16838 pcbreflux
ESP8266 With OpenHAB 2.4 using MQTT | Home Automation | OpenHAB #4
 
17:17
▶ Check out my gear on Kit: https://kit.com/wglabz This video is all about communicating ESP8266 /WeMOS with OpenHAB home automation system using MQTT. Using this DIY smart home devices can be made. Links: Arduino Code: http://bit.ly/2RAySLL OpenHAB Website: http://bit.ly/2h908zq Other Home Automation Videos: http://bit.ly/2fdnLX4 Related Videos: Java Application on Pi Playlist: http://bit.ly/2eB1O2K IOT With Raspberry Pi: http://bit.ly/2rPEHq8 ___________________________________________ Catch Us On: Twitter: https://twitter.com/wglabz GIT: https://github.com/oksbwn Facebook: http://www.facebook.com/wglabz -~-~~-~~~-~~-~- Guys, you can buy your products from Amazon by using the following link. Each product you buy we will get some tip out of it. And for this you don't need to pay anything extra and offers will remain the same. This will help us to make videos like this and maintain the channel. Thanks Team WG Amazon: http://amzn.to/2wd4isr #openhab #homeautomation #smarthome #esp8266 #arduino
Views: 2538 WeArGenius
openhab2 mqtt binding demo
 
02:09
This demo demonstrates how to use MQTT binding addon in OpenHAB2 installed into Orange Pi zero. The idea is very basic. A switch is created on default sitemap. When you turn on the switch, it sends "ON" message to Topic /office/light via MQTT broker that is installed on Orange Pi. When you turn off the switch, it sends "OFF" message to Topic /office/light. https://agrinode.blogspot.com/2017/04/openhab2-mqtt-binding-demo.html
Views: 25295 TIEN CAO
OpenHAB - MQTT Clients
 
08:05
General overview of the ESP8266 MQTT Clients and how the data is sent to our OpenHAB installation. Arduino sketch is available here: https://github.com/IDontKnow-YouTube/OpenHAB-MQTT Adafruit ESP8266 Module: https://www.adafruit.com/product/2471 Adafruit SHT31-D: https://www.adafruit.com/products/2857 DC Barrel Jack: https://www.adafruit.com/products/373
How-To Get Started with Mosquitto MQTT Broker on a Raspberry Pi
 
08:34
Yo, In this video, I'll be covering how-to install, setup, and use Mosquitto MQTT broker on a Raspberry Pi. Mosquitto is an awesome open source MQTT broker that you can run on a device like a Raspberry Pi. It's great because you don't have to share you data to the cloud and can keep everything locally on your system. Plus, it's free! MQTT is a great protocol for various DIY tech - like an Arduino, NodeMCU, or ESP8266 chip. If you have any questions, let me know! Happy to help with what I can! Cheers, Ben --- The Tech I Use --- http://geni.us/bruhkit ---Favorite Parts--- Raspberry Pi 3 - http://geni.us/raspberrypi3 Case - http://geni.us/2rQEgy5 SD Card - http://geni.us/PbZS2oD Power Supply - http://geni.us/2ABPd1D LIFX - http://geni.us/r0dC Aeotec Z-Stick Gen 5 - http://geni.us/N2ULv NodeMCU ESP8266 Chip - http://geni.us/6i9vl ---Shell Commands--- sudo apt-get update sudo apt-get upgrade sudo apt-get install mosquitto sudo apt-get install mosquitto-clients sudo nano /etc/mosquitto/mosquitto.conf allow_anonymous false password_file /etc/mosquitto/pwfile listener 1883 sudo mosquitto_passwd -c /etc/mosquitto/pwfile username mosquitto_sub -d -u username -P password -t "dev/test" mosquitto_pub -d -u username -P password -t "dev/test" -m "Hello world" ---Resources--- Mosquitto Configuration - http://mosquitto.org/man/mosquitto-conf-5.html MQTT Home Assistant - https://home-assistant.io/components/mqtt/ My Website - http://www.bruhautomation.com Home Assistant - https://home-assistant.io/ HA Forum - https://community.home-assistant.io/ HA Chatroom - https://gitter.im/home-assistant/home... HA GitHub - https://github.com/home-assistant
Views: 200266 BRUH Automation
Easy MQTT Broker Setup
 
07:35
This simple tutorial shows how to setup an MQTT broker on a Raspberry Pi. MQTT is a little bit explained and some examples are shown. It is also shown how to add password protection and get es fixed IP from a router. Links, code etc. can be found on the project page: http://bitluni.net/simple-mqtt-broker-setup-on-a-raspberry-pi/ Twitter: @bitluni If you like the video consider supporting my work on Patreon and get some extras: https://www.patreon.com/bitluni
Views: 68573 bitluni's lab
5. Умный Дом - Установка MQTT broker на Raspberry Pi
 
07:01
🔶 В этом видео: ◽ 00:38 Установка Mosquitto MQTT Broker (СПОСОБ 1) ◽ 03:07 Установка Mosquitto MQTT Broker (СПОСОБ 2) ◽ 04:00 Установка утилиты MQTT.fx на Windows ◽ 04:45 Проверка работы Mosquitto MQTT Broker с помощью утилиты MQTT.fx 🔶 MQTT, что это такое ? Немного теории: https://sprut.ai/client/article/234 🔶 Полезные ссылки по теме этого видео: ◽ Утилита MQTT.fx: https://mqttfx.jensd.de/index.php/download 🔶 Полезные команды из этого видео: ◽ apt-get update //Обновляем базу данных доступных пакетов из репозиториев ◽ apt-get install mc //Устанавливаем Midnight Comander ◽ apt-get install mosquitto //Устанавливаем Mosquitto MQTT брокер ◽ systemctl enable mosquitto.service //Добавляем Mosquitto MQTT брокер в автозагрузку ◽ ufw allow 1883/tcp //Открываем 1883/tcp порт на фаейрволе ◽ mosquitto_passwd -c /etc/mosquitto/passwd alexei //Создаем пользователя alexei и устанавливаем для него пароль ◽ Добавить в файл "/etc/mosquitto/mosquitto.conf" строки: allow_anonymous false // Запрет на подключения для анонимных пользователей password_file /etc/mosquitto/passwd // Путь к файлу с паролями Mosquitto MQTT брокера ◽ systemctl restart mosquitto //перезапуск брокера ◽ openhabian-config //запуск утилиты openhabian-config 🔶 Где взять устройства из этого видео?: ◽ Raspberry Pi3: http://got.by/2zr7y1 🔶 Мои другие видео: ◽ 4. Установка openHAB 2 на Windows 10: https://youtu.be/2R90hlC5Jzs ◽ 3. Установка openHAB 2 на Raspberry Pi 3: https://youtu.be/D6Px3jDNxPM ◽ 2. Самодельное настенное крепление для планшета из трубы: https://youtu.be/u8zFNUIHgRg ◽ 1. Умный Дом - Начало: https://youtu.be/1WDVufuN90Q 🔶 Music by: ◽ Jim Yosef & Alex Skrindo - Ruby [NCS Release] ◽ Mike Leite - The Way (Instrumental)
Views: 35 Room31
HiveMQ MQTT Broker Setup and Configuration
 
09:56
One in a series on DIY home automation. Learn how easy and quick it is to set up a robust MQTT broker for all your gadgets. The MQTT broker can be used for communication to IOT devices like Arduino, Netduino, Raspberry Pi, ESP8266, TI Launcpad and more.
Views: 15708 electronhacks
SONOFF POW in OPENHAB 2 einbinden / MQTT / TASMOTA
 
18:42
Servus, hier eine kleine Beschreibung wie ihr einen geflashten SonoffPow in euer OpenHab2 System einbinden könnt. Dieser wird dann mittels MQTT gesteuert und ausgelesen. die Code Zeilen Poste ich in die Kommentare da YT keine eckigen Klammern zulässt... ➥➥➥ ABONNIERT MEINEN KANAL FÜR MEHR VIDEOS ➥➥➥ Verpasse kein Video zum Thema Smart Home. Abonnieren ⇢ http://bit.ly/ST33ZYMedia ➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥ Facebook ⇢ https://www.facebook.com/St33zy-MEDIA-618163721950192/ Twitter ⇢ https://twitter.com/St33zyM ➥Unterstützen ⇢ https://www.gofundme.com/ST33ZYMedia
Views: 7903 ST33ZY Media
NodeRed + Arduino + OpenHab via MQTT
 
01:01
Raspberry Pi 3 - Mosquitto MQTT broker handle NodeRed + OpenHab and drive Arduino relays contols.
Views: 4320 Dmitry Krasnokutsky
OpenHab + MQTT + ESP8266-12E
 
12:09
Control devices from any part of the world using ESP826612E, MQTT Broker and Openhab2. This video is only to demonstrate how all these things works together. If you are interested in this project and want to learn then please feel free to contact me.
Views: 836 Tech Trivandrum
Sonoff Complete Guide : Custom Firmware/Software OpenHAB MQTT (Using WINDOWS)
 
15:11
In this video I will show you how to install custom firmware/software on a Sonoff Dual Using a Windows computer. We will be flashing the Sonoff with custom firmware that uses MQTT to connect to a server that is running OpenHAB 2 on a raspberry pi. To flash the firmware we will be using the Arduino IDE. Order the Kits, PCBs or 3D Printed Parts to make the devices here: https://www.mksmarthouse.com/shop Link To Sonoff Complete Guide (Written Guide): https://www.mksmarthouse.com/sonoff-power-strip Link To Using a Mac Computer: https://youtu.be/8naMP_OpBuY Buy a Sonoff Here: http://amzn.to/2hrGHl3 Link to all the Parts and Tools: https://www.mksmarthouse.com/sonoff-power-strip Link To Home Automation Server Guide: http://www.mksmarthouse.com/setup-instalation Link To Making An ESP8266 Door Sensor (Playlist): https://www.youtube.com/playlist?list=PLvNk0lS94UuKqz-AqEcHdmdZ8H-hEzbCA Home Automation Server Videos: Demo - https://youtu.be/bbWDnT-QMTI Hardware - https://youtu.be/rxCFN4l6gYg Software (Using Mac) - https://youtu.be/-uVmblps3kg Software (Using Windows) - https://youtu.be/7YR0xwyBJ2E Final Installation - https://youtu.be/cxP6rKpVpbk Check out the official website: http://www.mksmarthouse.com Twitter: https://www.twitter.com/mksmarthouse Facebook: https://www.facebook.com/MK-SmartHouse-244455842554740/ Instagram: https://www.instagram.com/mksmarthouse This channel will show you the path to creating your very own Ultimate Smart House using Arduino, raspberry pi, esp8266, OpenHAB 2 and more to do home automation. Each video will be a different project and tutorial that you can follow to make your house more technologically advanced. Also, there is more information as well as detailed guides on mksmarthouse.com
Views: 59324 MK-SmartHouse
Complete Guide Setting Up The Home Automation Server (OpenHAB 2 + MQTT): Software MAC
 
11:52
In this video I will show how to install OpenHAB 2 and Mosquito MQTT on The Smart Home, Home Automation Server which runs on a raspberry pi 3 using a MAC Computer. READ DESCRIPTION BELOW UPDATE!!! Order the Kits, PCBs or 3D Printed Parts to make the devices here: https://www.mksmarthouse.com/shop UPDATE WITH OPENHABIAN Version 1.2 and above: 1. Download the openhabianpi-raspbian-XXXXX.img.xz file 2. Download the unarchiver: http://wakaba.c3.cx/s/apps/unarchiver.html 3. Double click on the unarchiver.zip file 4. Drag The unarchiver to applications folder 5. Right click on the openhabianpi-raspbian-XXXXX.img.xz and open with the unarchiver 6. Proceed with the video and using apple pi baker Link To Home Automation Server Guide: http://www.mksmarthouse.com/setup-instalation Home Automation Server Videos: Demo - https://youtu.be/bbWDnT-QMTI Hardware - https://youtu.be/rxCFN4l6gYg Software (Using Mac) - https://youtu.be/-uVmblps3kg Software (Using Windows) - https://youtu.be/7YR0xwyBJ2E Final Installation - https://youtu.be/cxP6rKpVpbk Product Links: Raspberry Pi Stuff Raspberry Pi 3: http://amzn.to/2m62Kg6 Heatsink: http://s.click.aliexpress.com/e/IEYjeMf Case With Fan: http://s.click.aliexpress.com/e/aUBAeEi Power Adapter: http://amzn.to/2lIyh5E Micro SD Card: http://amzn.to/2mQZGo7 Ethernet Cables: http://amzn.to/2mQVsws ​ Wall Mount Hardware Plastic Spacers: http://s.click.aliexpress.com/e/2nUbA2j Screws (M3.5 + 20mm): http://s.click.aliexpress.com/e/jMfIEea ​ Tools Micro SD Card Reader: http://amzn.to/2lqsvL1 Impact Gun + Drill: http://amzn.to/2lqke9L Screw Bit Set: http://amzn.to/2mQSpoh Drill Bit Set: http://s.click.aliexpress.com/e/EyJMByR Counter Sink Bit Set: http://s.click.aliexpress.com/e/vfYNNRb Check out the official website: http://www.mksmarthouse.com Twitter: https://www.twitter.com/mksmarthouse Facebook: https://www.facebook.com/MK-SmartHouse-244455842554740/ Instagram: https://www.instagram.com/mksmarthouse This channel will show you the path to creating your very own Ultimate Smart House using Arduino, raspberry pi, esp8266, OpenHAB 2 and more to do home automation. Each video will be a different project and tutorial that you can follow to make your house more technologically advanced. Also, there is more information as well as detailed guides on mksmarthouse.com
Views: 20779 MK-SmartHouse
MQTT Network Controller
 
51:13
Learn how to publish and subscribe to messages sent via an MQTT message broker to be able to remotely control or monitor the status of devices, including Arduino, Raspberry Pi, Android, PC, and Wemos D1. In this video I'll demonstrate how to install and setup the Mosquitto MQTT server, available at www.mosquitto.org, on a Windows PC. I'll then create clients that subscribe to topics on that MQTT broker running on an Arduino UNO (via an Ethernet shield), a WeMos D1 (connected via built-in Wi-Fi), and a Raspberry Pi (connected via built-in ethernet), and control those devices by publishing messages using a command-line PC application and an Android app. You can access the wiring diagram, additional documentation, and code downloads used in this video at https://www.patreon.com/posts/17921563 00:00 - 05:55 Introduction and Demonstration 05:56 - 07:34 Android client demonstration 07:35 - 13:03 Arduino, Wemos, and Raspberry Pi Wiring 13:04 - 20:01 Installing and testing the Mosquitto MQTT server 20:02 - 37:24 Code for Arduino Ethernet and MQTT client 37:25 - 43:05 Code for Wemos WiFi and MQTT client 43:06 - 48:33 Code for Raspberry Pi MQTT client 48:34 - 50:10 Android client (MQTT Dash) 50:11 - 51:12 Wrapup
Views: 44064 Playful Technology
MQTT Publish and Subscribe Using Node Red
 
11:21
In this video tutorial we will look at the MQTT publsih and subscribe node main Settings and to create and configure a publish and subscribe node. The flow will demo a simple publish and subscribe. We also look at configuring different clients using different client ids. We alos look at how the publish and subscribe nodes share connection information and why you should be aware of this when editing nodes. Finally we create a very simple open/closed sensor that you can use for testing. Tutorial on Website http://www.steves-internet-guide.com/configuring-the-mqtt-publish-node Other videos The Node-Red Message Object for Beginners https://youtu.be/y05vQUIMIxs ------------ Create a Node Red Basic Flow - MQTT Subscribe Example https://youtu.be/eZUSQ1y6kSM --------------------------------- How to Create a Node-Red MQTT Dashboard https://youtu.be/Gu0Vq2kVNzw --------------------------- How to Store Data In Node Red Variables https://youtu.be/kNfP1vw2Img
Views: 25703 Steve Cope
openHAB 2 Basics - Items & Links | Creation and Configuration
 
12:51
In this openhab 2 Basics video, we talk about the basic block of openHAB configuration (Item), including Item type, description, links, group items, and how to add, edit and configure items and item channel links.. I use the PaperUI as well as VSCode to edit item configuration files (and show you both of the easy ways to do so). This video serves as the basics training in configuring your own installation of openHAB. In the following videos, we will build on this to define a full control system. In this new series, I'll take you through the entire process from starting up with openHAB, to developing advanced rules and home automation functionality. Keep an eye out for future videos and subscribe to my channel! --- JOIN OUR DISCORD SERVER (https://discord.gg/jUr7J4u) for DIY electronics, home automation and other discussions! --- LINKS TO EQUIPMENT/PARTS USED (AFFILIATE): -Raspberry Pi kit w/case and power supply - https://amzn.to/2NMiceN -32GB Sandisk microSD card - https://amzn.to/2NORDFv -32GB Sandisk USB Drive - https://amzn.to/2LgvSg8 -USB SD/microSD Card Reader/Writer - https://amzn.to/2Ld4oZ2 --- LINKS TO INFORMATION/SITES: -openHAB documentation (https://www.openhab.org/docs/) -Full openHAB 2 Playlist (https://www.youtube.com/playlist?list=PLH-d6dcsARGPnXoLnArHDCkOgwfVBDPWd) -openhabianPI Project/Image - https://github.com/openhab/openhabian -Items documentation site - https://www.openhab.org/docs/concepts/items.html#group-items -Icons documentation site - https://www.openhab.org/docs/configuration/iconsets/classic/ --- Thanks for watching my videos! If you want to support the channel, subscribe! You can also support me in the following ways: -Patreon: https://www.patreon.com/BKHobby -Affiliate links in this description (doesn't cost you anything! :) --- LINKS TO YOUTUBE GEAR: -Canon T3i camera - https://amzn.to/2LZGjbJ -Manfrotto Tripod - https://amzn.to/2AC5pZF -Rode Procaster Dynamic Mic - https://amzn.to/2KnsTkM -Behringer U-Phoria UMC22 USB Audio Interface - https://amzn.to/2MfoaDz --- Check out my (mostly functional) 3D designs - (https://www.thingiverse.com/bkpsu/about) ! If you like them and want to support my projects, use one of the links below when you're planning to buy anything from these sites (it won't cost you anything extra!). Thank you in advance! Banggood: https://goo.gl/uXGg84 AliExpress: https://goo.gl/KRNurW Amazon: https://goo.gl/nWhmjJ
Views: 19526 BK Hobby
IOT - ESP8266-12E OPENHAB and MQTT Broker Collocated Server with Raspberry Pi 2 or 3 ....
 
01:41
ESP8666-12E OPENHAB2 MQTT Full Project build available at http://www.iiot.co.za/Project_OpenHAB_MQTT_ESP8266-12E_and_Raspberry_Pi
Views: 12474 KLD TECHNOLOGIES
How To Get Started with MQTT and Owntracks
 
09:00
Hey guys! This week I'm talking about MQTT and Owntracks. A bunch of you guys wanted me to do a video on this so you know I got to make that happen! I hope this helps with getting started. I'm planning on doing more videos on MQTT soon like setting up Mosquitto and using Home Assistant's native HBMQTT broker. If you have any questions or comments, let me know! Happy to help as I can. Cheers, Ben ---Topics--- Intro - 0:00 MQTT Overview- 0:10 MQTT Terms - 1:12 MQTT Brokers - 2:44 Setting Up CloudMQTT - 3:11 Setting Up Owntracks - 4:40 Setting up Home Assistant - 06:12 Outro - 7:45 --- The Tech I Use --- http://geni.us/bruhkit ---Favorite Pi Parts--- Raspberry Pi 3 - http://geni.us/raspberrypi3 Case - http://geni.us/2rQEgy5 SD Card - http://geni.us/PbZS2oD Power Supply - http://geni.us/2ABPd1D LIFX - http://geni.us/r0dC Aeotec Z-Stick Gen 5 - http://geni.us/N2ULv NodeMCU ESP8266 Chip - http://geni.us/6i9vl ---Resources--- My Website - http://www.bruhautomation.com Home Assistant - https://home-assistant.io/ HA Forum - https://community.home-assistant.io/ HA Chatroom - https://gitter.im/home-assistant/home-assistant HA GitHub - https://github.com/home-assistant Owntracks - http://owntracks.org/ MQTT - http://mqtt.org/
Views: 73110 BRUH Automation
Learn, How to save MQTT messages into a MySQL Database
 
54:06
Blog post : http://www.raviyp.com/embedded/233-learn-how-to-save-mqtt-messages-into-a-mysql-database This video explains how we can save MQTT messages arriving at the broker into a MySQL database using REST API endpoints created by Dreafactory software. We will learn about EMQ (Erlang MQTT Broker) a open source MQTT broker written in Erlang. We will also see how to install these two open source softwares side by side on a AWS instance running NGNIX server.
Views: 8694 Ravi Pujar
Sonoff S31 Smart Plug - Flashing Tasmota and openHAB MQTT Configuration
 
12:50
Sonoff S31 Smart Plug Tasmota Firmware Flash and openHAB MQTT Configuration - In this video, I'll show you how to take apart, connect to and flash Tasmota Firmware onto a Sonoff S31 Smart Plug, how to configure the Tasmota Sonoff S31 firmware, and how to connect the flashed smart plug to your openHAB 2 home automation system through MQTT. --- JOIN OUR DISCORD SERVER (https://discord.gg/jUr7J4u) for DIY electronics, home automation and other discussions! --- LINKS TO EQUIPMENT/PARTS USED (AFFILIATE): -Sonoff S31 Smart Plug - https://amzn.to/2RwEFRr -FTDI USB/Serial Converter - https://amzn.to/2LRylPk -Raspberry Pi kit w/case and power supply - https://amzn.to/2NMiceN -32GB Sandisk microSD card - https://amzn.to/2NORDFv -32GB Sandisk USB Drive - https://amzn.to/2LgvSg8 -USB SD/microSD Card Reader/Writer - https://amzn.to/2Ld4oZ2 --- LINKS TO INFORMATION/SITES: -ESPEasy Flasher (https://github.com/letscontrolit/ESPEasy/releases) -Tasmota Firmware (https://github.com/arendst/Sonoff-Tasmota/releases) -openHAB documentation (https://www.openhab.org/docs/) -Full openHAB 2 Playlist (https://www.youtube.com/playlist?list=PLH-d6dcsARGPnXoLnArHDCkOgwfVBDPWd) -openhabianPI Project/Image - https://github.com/openhab/openhabian -Items documentation site - https://www.openhab.org/docs/concepts/items.html#group-items --- Thanks for watching my videos! If you want to support the channel, subscribe! You can also support me in the following ways: -Patreon: https://www.patreon.com/BKHobby -Affiliate links in this description (doesn't cost you anything! :) --- LINKS TO YOUTUBE GEAR: -Canon T3i camera - https://amzn.to/2LZGjbJ -Manfrotto Tripod - https://amzn.to/2AC5pZF -Rode Procaster Dynamic Mic - https://amzn.to/2KnsTkM -Behringer U-Phoria UMC22 USB Audio Interface - https://amzn.to/2MfoaDz -Logitech c922x Pro Streamer Cam - https://amzn.to/2SIim96 --- Check out my (mostly functional) 3D designs - (https://www.thingiverse.com/bkpsu/about) ! If you like them and want to support my projects, use one of the links below when you're planning to buy anything from these sites (it won't cost you anything extra!). Thank you in advance! Banggood: https://goo.gl/uXGg84 AliExpress: https://goo.gl/KRNurW Amazon: https://goo.gl/nWhmjJ
Views: 3939 BK Hobby
Installing Mosquitto (MQTT) broker on Synology NAS
 
02:54
Installing Mosquitto on Synology DSM6.1 is not working with the default configuration. However there's a way to fix this, and it's pretty simple. Synology DS216j specifications: 1. CPU Model: Marvell Armada 385 88F6820 2. CPU Architecture: 32-bit 3. CPU Frequency: Dual Core 1.0 GHz 4. System Memory: 512 MB DDR3 5. Storage Drive Bays: 2 6. RJ-45 1GbE LAN Port: 1 7. USB 3.0 Port: 2 NAS Software: DSM 6.1.1 Synology NAS: https://www.synology.com/en-global/products/DS216j Mosquitto broker https://mosquitto.org/ MQTT: http://mqtt.org/ PuTTy: http://www.putty.org/ Store messages from Mosquitto MQTT broker into SQL Database: http://ediy.com.my/blog/item/143-store-messages-from-mosquitto-mqtt-broker-into-sql-database
Views: 21094 ediy
OpenHAB + MQTT + InfluxDB Install on Raspberry Pi from scratch
 
30:59
OpenHAB: http://www.openhab.org/ MQTT: http://mqtt.org/ InfluxDB: https://www.influxdata.com/ Raspberry Pi: https://www.raspberrypi.org/downloads/raspbian/ Wireless Interface Config: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md Install InfluxDB: https://docs.influxdata.com/influxdb/v0.13/introduction/installation/ Theres too many small, simple commands to put everything in the description but I've pasted the larger ones here: OpenHAB Key and Source (remove brackets from http://): wget -qO - '[https://]bintray.com/user/downloadSubjectPublicKey?username=openhab' | sudo apt-key add - echo "deb [http://]dl.bintray.com/openhab/apt-repo stable main" | sudo tee /etc/apt/sources.list.d/openhab.list Tailing the OpenHAB log file: sudo tail -f /var/log/openhab/openhab.log Influx Key and Sources: curl -sL [https://]repos.influxdata.com/influxdb.key | sudo apt-key add - test $VERSION_ID = "8" && echo "deb [https://]repos.influxdata.com/debian jessie stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
Domótica Barata (14).  Openhab, MQTT, No-IP, IP fija en Raspberry(#4K)
 
22:55
Todo en uno en el servidor domótico. Openhab, MQTT, No-IP, IP Fija y passwords. Links: Raspbian: https://www.raspberrypi.org/downloads/raspbian/ SDFormater: https://www.sdcard.org/downloads/formatter_4/eula_windows/index.html Win32Disk: https://sourceforge.net/projects/win32diskimager/ No-IP: https://www.noip.com/ Fing: https://play.google.com/store/apps/details?id=com.overlook.android.fing&hl=es Configurar No-IP en raspbian: https://www.realdroid.es/2016/10/29/configurar-no-ip-para-raspberry-pi-y-de-paso-que-es-no-ip/
Views: 2245 Jorge Pascual
What is MQTT and How It Works
 
04:05
For a written version of this video and extra resources, visit ► https://randomnerdtutorials.com/what-is-mqtt-and-how-it-works/ Go to this link to see all my tutorials ► https://randomnerdtutorials.com/tutorials Like my page on Facebook: http://www.facebook.com/RandomNerdTutorials Add me on Google+: https://plus.google.com/+RuiSantosdotme Follow me on twitter: https://twitter.com/RuiSantosdotme Subscribe for more projects like this! http://bit.ly/subscribeRNT
Views: 230315 Rui Santos
Complete Guide LED Strip Control MQTT OpenHAB ESP8266 : Software WINDOWS
 
09:20
In this video, I will show you the software of the ESP8266 MQTT OpenHAB LED Strip and how to connect it to OpenHAB using Windows. With this LED Strip Control we will be able to change the color of the LED's from mobile devices and OpenHAB. I will show you how to make an LED Strip controlled by openHAB 2, siri, home kit, ios and Android. Order the Kit, PCB or 3D Printed Parts to make this here: https://www.mksmarthouse.com/shop Link To MQTT OpenHAB ESP8266 LED Strip Control (Written Guide): http://www.mksmarthouse.com/led-control-software-windows Link to all the Parts and Tools: http://www.mksmarthouse.com/led-control-hardware Link To Home Automation Server Guide: http://www.mksmarthouse.com/setup-instalation Home Automation Server Videos: Demo - https://youtu.be/bbWDnT-QMTI Hardware - https://youtu.be/rxCFN4l6gYg Software (Using Mac) - https://youtu.be/-uVmblps3kg Software (Using Windows) - https://youtu.be/7YR0xwyBJ2E Final Installation - https://youtu.be/cxP6rKpVpbk Check out the official website: http://www.mksmarthouse.com Twitter: https://www.twitter.com/mksmarthouse Facebook: https://www.facebook.com/MK-SmartHouse-244455842554740/ Instagram: https://www.instagram.com/mksmarthouse This channel will show you the path to creating your very own Ultimate Smart House using Arduino, raspberry pi, esp8266, OpenHAB 2 and more to do home automation. Each video will be a different project and tutorial that you can follow to make your house more technologically advanced. Also, there is more information as well as detailed guides on mksmarthouse.com
Views: 6142 MK-SmartHouse
MQTT Broker/Bridge on the ESP8266
 
17:28
The esp_uMQTT_broker is an MQTT broker, client, and bridge, as well as an automation controller. This video describes the ideas of the project as well as its features. Find the code and more info on github: https://github.com/martin-ger/esp_mqtt The pure library code for the ESP8266 Arduino environment is available here: https://github.com/martin-ger/uMQTTBroker
Views: 37697 Martin Ger
openHAB 2 Basics - Setting up Things Channels and Bindings
 
11:50
In this openhab 2 Basics video, we start discussing one of the basic building blocks of openHAB configuration (Things), including Thing Channels, Bindings, and how to install/configure them.. I use the Phillips Hue and Astro bindings as an example, but this process applies to all Bindings and Things in openHAB 2. I also discuss two of the common ways to install bindings, and how they diiffer (including pros and cons of each). This video serves as the basics training in configuring your own installation of openHAB. In the following videos, we will build on this to define a full control system. In this new series, I'll take you through the entire process from starting up with openHAB, to developing advanced rules and home automation functionality. Keep an eye out for future videos and subscribe to my channel! --- JOIN OUR DISCORD SERVER (https://discord.gg/jUr7J4u) for DIY electronics, home automation and other discussions! --- LINKS TO EQUIPMENT/PARTS USED (AFFILIATE): -Raspberry Pi kit w/case and power supply - https://amzn.to/2NMiceN -32GB Sandisk microSD card - https://amzn.to/2NORDFv -32GB Sandisk USB Drive - https://amzn.to/2LgvSg8 -USB SD/microSD Card Reader/Writer - https://amzn.to/2Ld4oZ2 --- LINKS TO INFORMATION/SITES: -openHAB documentation (https://www.openhab.org/docs/) -Full openHAB 2 Playlist (https://www.youtube.com/playlist?list=PLH-d6dcsARGPnXoLnArHDCkOgwfVBDPWd) -openhabianPI Project/Image - https://github.com/openhab/openhabian --- Thanks for watching my videos! If you want to support the channel, subscribe! You can also support me in the following ways: -Patreon: https://www.patreon.com/BKHobby -Affiliate links in this description (doesn't cost you anything! :) --- LINKS TO YOUTUBE GEAR: -Canon T3i camera - https://amzn.to/2LZGjbJ -Manfrotto Tripod - https://amzn.to/2AC5pZF -Rode Procaster Dynamic Mic - https://amzn.to/2KnsTkM -Behringer U-Phoria UMC22 USB Audio Interface - https://amzn.to/2MfoaDz --- Check out my (mostly functional) 3D designs - (https://www.thingiverse.com/bkpsu/about) ! If you like them and want to support my projects, use one of the links below when you're planning to buy anything from these sites (it won't cost you anything extra!). Thank you in advance! Banggood: https://goo.gl/uXGg84 AliExpress: https://goo.gl/KRNurW Amazon: https://goo.gl/nWhmjJ
Views: 30131 BK Hobby
Installing Mosquitto Broker on windows
 
12:18
Step 1: Download mosquitto https://mosquitto.org/download/ Step 2: Download openssl http://slproweb.com/products/Win32OpenSSL.html Step 3: Copy openssl32\bin folder to mosquitto C:\openssl\bin --- C:\Program Files(x86)\mosquitto Step 4: Copy required dll files C:\openssl\libeay32.dll --- C:\Program Files(x86)\mosquitto Step 5: Copy required dll files C:\openssl\ssleay32.dll --- C:\Program Files(x86)\mosquitto Step 6: Download pthreadVC2.dll ftp://sources.redhat.com/pub/pthreads-win32/dll-latest/dll/x86/ Step 7: Copy pthreadVC2.dll file C:\Downloads\pthreadVC2.dll --- C:\Program Files(x86)\mosquitto Step 8: Test subscriber / server mosquitto_sub -v -t 'home/light' Step 9: Test publisher / client mosquitto_pub -t 'home/light' -m 'Turn ON' Step 10: Test2 publisher / client mosquitto_pub -t 'home/light' -m 'Turn OFF' Thats all I have for you!! by Ashok
Views: 15136 Learn With Me
Home Automation at Home Part 1: ESP8266 & MQTT
 
14:03
Want to make your own security system? Thermostat? Automated lighting? Watch Home Automation at Home to learn how to do all of these things and more! In this video we will be setting up a Raspberry Pi with the Mosquitto MQTT broker and using to control an ESP8266 running an MQTT client. Mosquitto MQTT Raspberry Pi Install Page: http://mosquitto.org/2013/01/mosquitto-debian-repository/ The code & breadboard layout from this video can be found here: https://github.com/ItKindaWorks/ESP8266/tree/master/Home%20Automation/Part%201 Subscribe for more weekly videos! Follow me on Twitter @itkindaworksinc
Views: 143814 ItKindaWorks
Complete Guide Sprinkler System MQTT OpenHAB ESP8266 : Hardware
 
08:21
In this video I will show you the hardware of the ESP8266 MQTT OpenHAB Sprinkler System as well as how to put it together and make it. With this sprinkler system we will be able to control sprinklers from mobile devices and OpenHAB. Order the Kits, PCBs or 3D Printed Parts to make the devices here: https://www.mksmarthouse.com/shop Link To MQTT OpenHAB ESP8266 Sprinkler System (Written Guide): https://www.mksmarthouse.com/sprinkler-system Link to all the Parts and Tools: https://www.mksmarthouse.com/sprinkler-system Link To Schematics, Bred board Layout and Assembly list: https://www.mksmarthouse.com/sprinkler-system Link To Home Automation Server Guide: http://www.mksmarthouse.com/setup-instalation Home Automation Server Videos: Demo - https://youtu.be/bbWDnT-QMTI Hardware - https://youtu.be/rxCFN4l6gYg Software (Using Mac) - https://youtu.be/-uVmblps3kg Software (Using Windows) - https://youtu.be/7YR0xwyBJ2E Final Installation - https://youtu.be/cxP6rKpVpbk Check out the official website: http://www.mksmarthouse.com Twitter: https://www.twitter.com/mksmarthouse Facebook: https://www.facebook.com/MK-SmartHouse-244455842554740/ Instagram: https://www.instagram.com/mksmarthouse This channel will show you the path to creating your very own Ultimate Smart House using Arduino, raspberry pi, esp8266, OpenHAB 2 and more to do home automation. Each video will be a different project and tutorial that you can follow to make your house more technologically advanced. Also, there is more information as well as detailed guides on mksmarthouse.com
Views: 11171 MK-SmartHouse
#3 MQTT with Arduino Ethernet Shield
 
04:44
Tutorial on how to use Ethernet shield with MQTT
Views: 11853 Fedor Weems
Controlling LED strips on an Arduino from openHAB with MQTT messages
 
01:14
In this video, I control LED lights connected to an Arduino Yun via openHAB and MQTT messages. openHAB publishes the values for colors and animations to an MQTT broker to which the Un is subscribed. The blog post on how to set everything up, can be found here: http://frederickvandenbosch.be/?p=296 For more videos, guides, projects and reviews: Website: http://frederickvandenbosch.be Twitter: http://twitter.com/f_vdbosch G+: http://plus.google.com/u/0/+FrederickVandenbosch
Views: 6687 Frederick Vandenbosch
Complete Guide LED Strip Notifications ESP8266 MQTT OpenHAB 2
 
06:08
Let me give you a scenario. I'm sitting at my desk working as fast as I can, to get the next MK-SmartHouse video finished. Then out of nowhere I hear “What you up to?” I jump and almost get a heart attack. This scary situation could be avoided, and let me explain how. In this video, I will show you how to send alerts to your led strip or in other words how to make it flash when something happens such as a door opening. ★★GUIDE IN WRITTEN FORM★★ Complete Guide LED Strip Notifications OpenHAB 2: https://www.mksmarthouse.com/led-notifications ★★DONATE★★ If I have helped you please consider donating, every little bit counts: http://www.mksmarthouse.com/donate ★★PARTS, TOOLS, AND ITEMS USED★★ LED Strip Kit: https://www.mksmarthouse.com/shop/LED-Strip-p93481843 Door Sensor Kit: https://www.mksmarthouse.com/shop/Door-Sensor-p93393145 Headphones: https://amzn.to/2HzsT1y Monitors: https://amzn.to/2qq6Xxq Speakers: https://amzn.to/2JDwLzf Full List: https://www.mksmarthouse.com/led-notifications-links Order Kits, PCBs and 3D Printed Parts here: https://www.mksmarthouse.com/shop ★★MENTIONED GUIDES★★ LED Strip Guide: https://www.youtube.com/playlist?list=PLvNk0lS94UuKP_gIJfLSRLIJoxNrElzTB Door Sensor: https://www.youtube.com/playlist?list=PLvNk0lS94UuKqz-AqEcHdmdZ8H-hEzbCA ★★OFFICIAL WEBSITE★★ Check out the official website: http://www.mksmarthouse.com ★★SOCIALS★★ Twitter: https://www.twitter.com/mksmarthouse Facebook: https://www.facebook.com/MK-SmartHouse-244455842554740/ Instagram: https://www.instagram.com/mksmarthouse Snap: mksmarthouse ★★MISSION STATEMENT★★ This channel will show you the path to creating your very own Ultimate Smart House using Arduino, raspberry pi, esp8266, OpenHAB 2 and more to do home automation. Each video will be a different project and tutorial that you can follow to make your house more technologically advanced. Also, there is more information as well as detailed guides on mksmarthouse.com
Views: 6352 MK-SmartHouse
DIY Bewegungsmelder OPENHAB 2 / Wemos D1 mini / PIR Sensor / MQTT / ESPEASY / esp8266
 
17:19
In diesem Video zeige ich euch wie ihr einen Bewegungsmelder mit einem Wemos D1 mini im openHAB2 System benutzen könnt. Dazu flasht Ihr euren D1 mini mit der Software ESPEASY und legt einen MQTT Controller an. Den PIR verbindet ihr dann mit dem D1 mini und legt ihn in den Devices an. Danach könnt ihr mithilfe von MQTT.fx die Strings auslesen und diese dann in euer openHAB System integrieren. ESPEASY: https://github.com/letscontrolit/ESPEasy/releases Wemos D1 mini: https://www.gearbest.com/other-accessories/pp_009690608244.html?wid=1433363 PIR: https://www.aliexpress.com/item/Free-Shipping-1PCS-SR501-HC-SR501-Adjust-IR-Pyroelectric-Infrared-PIR-module-Motion-Sensor-Detector-Module/1874938103.html?spm=2114.search0104.3.1.31646165Tt8kp6&ws_ab_test=searchweb0_0,searchweb201602_4_10320_10065_10068_10547_319_317_10548_10696_453_10084_454_10083_433_10618_431_10304_10307_10820_10821_537_10302_536_10843_10059_10884_10887_100031_10319_321_322_10103,searchweb201603_6,ppcSwitch_0&algo_expid=858190de-9d4d-4149-85e1-c39744aec446-0&algo_pvid=858190de-9d4d-4149-85e1-c39744aec446&transAbTest=ae803_4 link zu den Items und Regel Zeilen: https://drive.google.com/file/d/1ZvxExlvwcZC8mflznEfP_h4xwwlUJo1s/view?usp=sharing ➥➥➥ ABONNIERT MEINEN KANAL FÜR MEHR VIDEOS ➥➥➥ Verpasse kein Video zum Thema Smart Home. Abonnieren ⇢ http://bit.ly/ST33ZYMedia ➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥ Facebook ⇢ https://www.facebook.com/St33zy-MEDIA-618163721950192/ Twitter ⇢ https://twitter.com/St33zyM Unterstützen ⇢ https://www.gofundme.com/ST33ZYMedia
Views: 2266 ST33ZY Media
Shelly 1PM Installation & Einrichtung | OPENHAB 2 | Shelly Mqtt Tutorial deutsch
 
28:37
In diesem Video stelle ich Euch den Shelly 1 PM vor. Das kleine Relais kann ohne Probleme hinter einen bestehenden Lichtschalter montiert werden. Der Vorteil gegenüber den Shelly 1 liegt dabei an der Stromverbrauchsmessung. Als erstes zeige Ich wie man den Shelly anschließt, über das Smartphone mit der Shelly app einrichtet und danach in openHAB2 einbindet und ihn mithilfe von MQTT ansteuert. link zu den Zeilen: https://drive.google.com/file/d/1VWydFdwzf1kFk4uHfqXy-0WZ16_Nobzb/view?usp=sharing ➥➥➥ ABONNIERT MEINEN KANAL FÜR MEHR VIDEOS ➥➥➥ Verpasse kein Video zum Thema Smart Home. Abonnieren ⇢ http://bit.ly/ST33ZYMedia ➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥➥ Unterstützen ⇢ https://www.gofundme.com/ST33ZYMedia Facebook ⇢ https://www.facebook.com/St33zy-MEDIA... Twitter ⇢ https://twitter.com/St33zyM
Views: 1548 ST33ZY Media
Configuring MQTTSpy and testing an MQTT Broker
 
03:18
Configuring your MQTTSpy Installation and testing your MQTT Broker Details here; http://www.instructables.com/id/Setting-Up-an-MQTT-Broker-Part-2-IoT-Home-Automati/
Views: 3629 Steve Quinn
IoT with OpenHAB and MQTT
 
41:34
SC LUGs
Views: 166 Ben Francis
Orange Pi Zero Part4 Установка MQTT Broker MOSQUITTO на ARMBIAN | Debian Jessie
 
08:40
Orange Pi Zero - 749 руб. ($13) - http://ali.ski/fqOBYp (Orange Pi Zero 512MB+Expansion Board+Black Case) Orange Pi Zero 512MB - 538 руб. ($9) - http://ali.ski/fqOBYp Orange Pi Zero 256MB - 418руб. ($7) - http://ali.ski/kmD7BK Аксесуары и расширения к Orange Pi Zero - http://ali.ski/JB0_D Видео Кабель AV - http://ali.ski/rrHdf8 SD Card SanDisk 16Gb (armbian) - http://ali.ski/sJwFU ОФИЦИАЛЬНЫЙ МАГАЗИН ПРОИЗВОДИТЕЛЯ ORANGE PI - http://ali.ski/-3S7P Заказ отправлен 2017-03-20 01:04:31, получен 2017-04-13 13:08:50 = 24 дня!!! ------------------------------------------ Листинг команд: PDF - https://yadi.sk/i/qm_ioGY03HW6Y4 (скачивайте, в предпросмотре отображается только начало листинга) Листинг команд так же приведен в EN субтитрах Part1 - https://youtu.be/kSEPtg2dLlw Part2 - https://youtu.be/Maak7gX4lpc Part3 - https://youtu.be/KF9Se5QWqqU
Views: 8514 SMART BOX
A Guide to MQTT by Hacking a Doorbell to send Push Notifications
 
23:00
In this video I'll use a cheap wireless doorbell and hack it so it sends me a push notification when someone is at the door. I used this project to explain the basics of the IoT by setting up an MQTT broker on a raspberry pi. [GitHub] Doorbell Pushnotifier App: https://github.com/robin7331/doorbell-notifier-app [GitHub] RFDuino companion App: https://github.com/robin7331/rfduino-doorbell-endpoint [GitHub] RFDuino Arduino Code: https://github.com/robin7331/rfduino-arduino Pushover Website: https://pushover.net/ If you purchase one of the items below I'll get a small commission from amazon. Thanks for your support! Parts: 🛒 Tecknet Doorbell http://geni.us/B4FmV 🛒 Raspberry Pi 3 http://geni.us/LBE08UA ⚒ Tools I currently use Rigol DS1054Z http://geni.us/u3k2P0P Ersa i-CON PICO http://geni.us/u3k2P0P MP Select Mini 3D Printer http://geni.us/Gfp4 iFixit Pro Tech Toolkit http://geni.us/qFxs ❤️ Enjoying my videos? I put a lot of effort into every single video. If you like, help me covering my running costs with a dollar or two. Patreon: https://www.patreon.com/Robin_Reiter PayPal: https://www.paypal.me/RobinReiterME You can also support me by ordering something through one of my affiliate links: Amazon: http://geni.us/7HDBdR Happy Hacking! (Awesome) Music by: David Cutter Music - http://www.davidcuttermusic.co.uk
Views: 12692 Robin Reiter
Security Alarm System using MQTT and OpenHAB
 
08:05
This video is a showcase for a versatile ESP8266 I/O Board which directly runs with AC mains power supply and can be use in the verity of the ways for different purpose. in this video it is been used as a Security Alarm System. We can connect different type of sensors with is I/O Board. in this video i am using a PIR sensor and a Reed Switch based door and window sensor for the demonstration of this project. $4.9 for 10 PCBs From Seeed Fusion: https://www.seeedstudio.com/fusion.html
Views: 389 brainstorm ABC
Complete Guide Sprinkler System MQTT OpenHAB ESP8266 : Final Installation
 
04:13
In this video I will show how to install the ESP8266 MQTT OpenHAB Sprinkler System in its final place or location for use every day. I also show you how to connect the sprinkler valves to it. Order the Kits, PCBs or 3D Printed Parts to make the devices here: https://www.mksmarthouse.com/shop Link To MQTT OpenHAB ESP8266 Sprinkler System (Written Guide): https://www.mksmarthouse.com/sprinkler-system Link to all the Parts and Tools: https://www.mksmarthouse.com/sprinkler-system Link To Home Automation Server Guide: http://www.mksmarthouse.com/setup-instalation Home Automation Server Videos: Demo - https://youtu.be/bbWDnT-QMTI Hardware - https://youtu.be/rxCFN4l6gYg Software (Using Mac) - https://youtu.be/-uVmblps3kg Software (Using Windows) - https://youtu.be/7YR0xwyBJ2E Final Installation - https://youtu.be/cxP6rKpVpbk Check out the official website: http://www.mksmarthouse.com Twitter: https://www.twitter.com/mksmarthouse Facebook: https://www.facebook.com/MK-SmartHouse-244455842554740/ Instagram: https://www.instagram.com/mksmarthouse This channel will show you the path to creating your very own Ultimate Smart House using Arduino, raspberry pi, esp8266, OpenHAB 2 and more to do home automation. Each video will be a different project and tutorial that you can follow to make your house more technologically advanced. Also, there is more information as well as detailed guides on mksmarthouse.com
Views: 5260 MK-SmartHouse
Testing OpenHAB Home Automation UI with Live Data
 
04:29
This video clip shows how it is possible to test an OpenHAB IoT Home automation UI with Live Data via an MQTT broker (Mosquitto) with IoT devices present. Details; http://www.instructables.com/id/Setting-Up-and-Configuring-OpenHAB-Part-6-IoT-Home/
Views: 506 Steve Quinn
Using the Sonoff IoT/WiFi Relay with your own MQTT Server (#52)
 
12:35
Previously I connected up a Sonoff relay (about £4 to buy) to my WiFi, to switch mains loads via a phone app. What I really want, though, is to reflash the unit so that it works with a server here in the house rather than the Sonoff/eWelink server up in the cloud. Using the same method I could talk to my own cloud server, using Amazon Web Services or Google Cloud. I'm using the Tasmota software in my Sonoff relay, an awesome piece of work from Theo Arends: https://github.com/arendst/Sonoff-Tasmota There's a very nice walk-through of how to build Tasmota (using PlatformIO and the Atom editor) on the QuickPi channel: https://www.youtube.com/watch?v=n4MDRm2yAJg His walk through is on a Mac, but the Atom/PlatformIO works exactly the same on Windows, and this is what I did. PlatformIO (open source dev tools for IoT): http://platformio.org/ Atom IDE: https://atom.io/
Views: 28052 Martyn Davies
openHAB 2 Basics - Rules DSL Introduction
 
15:17
This openHAB 2 Basics series video is an introduction to the openHAB Rules DSL, where I'll show you how to create your first openHAB home automation Rule, how the rule triggers work, what Rule syntax looks like, and what variables, helpers functions and organization options you have. After watching this video and the rest of the openHAB 2 Basics series, you should be ready to create your own home automation system in openHAB. In this new series, I'll take you through the entire process from starting up with openHAB, to developing advanced rules and home automation functionality. Keep an eye out for future videos and subscribe to my channel! --- JOIN OUR DISCORD SERVER (https://discord.gg/jUr7J4u) for DIY electronics, home automation and other discussions! --- LINKS TO EQUIPMENT/PARTS USED (AFFILIATE): -Raspberry Pi kit w/case and power supply - https://amzn.to/2NMiceN -32GB Sandisk microSD card - https://amzn.to/2NORDFv -32GB Sandisk USB Drive - https://amzn.to/2LgvSg8 -USB SD/microSD Card Reader/Writer - https://amzn.to/2Ld4oZ2 --- LINKS TO INFORMATION/SITES: -openHAB documentation (https://www.openhab.org/docs/) -openHAB documentation - RULES DSL - https://www.openhab.org/docs/configuration/rules-dsl.html -Full openHAB 2 Playlist (https://www.youtube.com/playlist?list=PLH-d6dcsARGPnXoLnArHDCkOgwfVBDPWd) -openhabianPI Project/Image - https://github.com/openhab/openhabian -smartHomeBlog Presence Detection - https://www.smarthomeblog.net/presence-detection-with-openhab/ -BK Hobby openHAB configuration GitHub repo - https://github.com/bkpsu/openhab2-conf-bartus --- Thanks for watching my videos! If you want to support the channel, subscribe! You can also support me in the following ways: -Patreon: https://www.patreon.com/BKHobby -Affiliate links in this description (doesn't cost you anything! :) --- LINKS TO YOUTUBE GEAR: -Canon T3i camera - https://amzn.to/2LZGjbJ -Manfrotto Tripod - https://amzn.to/2AC5pZF -Rode Procaster Dynamic Mic - https://amzn.to/2KnsTkM -Behringer U-Phoria UMC22 USB Audio Interface - https://amzn.to/2MfoaDz --- Check out my (mostly functional) 3D designs - (https://www.thingiverse.com/bkpsu/about) ! If you like them and want to support my projects, use one of the links below when you're planning to buy anything from these sites (it won't cost you anything extra!). Thank you in advance! Banggood: https://goo.gl/uXGg84 AliExpress: https://goo.gl/KRNurW Amazon: https://goo.gl/nWhmjJ
Views: 4048 BK Hobby